Resin mold volume calculator

Back to calculator

How to work out how much resin you need

Calculate rectangular or cylindrical mold volume, subtract displaced volume and add a chosen allowance. Optional component volumes apply only when the manufacturer specifies a ratio by volume.

Quick answer: A 10 × 5 × 2 cm rectangular mold with no displacement and 10% extra needs 110 mL of mixed product.

Step by step

  1. Measure the inside of the mold: length and width for a rectangle, or the diameter for a round mold, plus the depth you will fill.
  2. Work out the volume. For a rectangle multiply length × width × depth; for a cylinder use π × radius² × depth. One cubic centimetre is one millilitre.
  3. Subtract the volume of anything you embed, such as wood, stones or dried flowers.
  4. Add an allowance for resin left in the cup, then split the total into parts A and B using the ratio on the product.

What to enter in the calculator

How the calculation works

Rectangular volume is length × width × depth; cylindrical volume is π × (diameter ÷ 2)² × depth. A cubic centimetre is one millilitre. Subtract displaced volume per mold, multiply by mold count, then add the allowance. For a stated volume ratio A:B, split the total in those proportions.

Common mistakes

Another worked example

A cylinder 10 cm in diameter and 2 cm deep holds about 157.08 mL before any allowance.

Open the calculator to use your own measurements.

What changes the estimate

The example 2:1 ratio is illustrative. Enter the exact ratio and measurement basis from your product instructions. Do not use the component-volume results for a ratio specified by mass. Do not guess density to convert a mass ratio. Follow the manufacturer’s mixing, batch-size and handling instructions.

References and review

References provide measurement or subject background. The formulas, examples and limitations on this site are our implementation; linked organizations do not endorse this tool.

. Example inputs are illustrative.