Resin mold volume calculator

Back to calculator

Method and assumptions

Resin mold volume calculator

Rectangular volume is length × width × depth; cylindrical volume is π × (diameter ÷ 2)² × depth. A cubic centimetre is one millilitre. Subtract displaced volume per mold, multiply by mold count, then add the allowance. For a stated volume ratio A:B, split the total in those proportions.

Limits and interpretation

The example 2:1 ratio is illustrative. Enter the exact ratio and measurement basis from your product instructions. Do not use the component-volume results for a ratio specified by mass. Do not guess density to convert a mass ratio. Follow the manufacturer’s mixing, batch-size and handling instructions.

Units and rounding

Lengths convert using exactly 0.3048 metres per foot and 2.54 centimetres per inch. Area and volume conversions use the corresponding squared and cubed factors. Counts round up where whole items must be purchased; wallpaper drops per roll and fabric pieces across a width round down. Displayed values may be rounded, while calculations retain additional precision.

Compare inputs with the worked examples on the calculator page. A different material, layout or measurement can require different assumptions.

References

References provide measurement or subject background. The formulas, examples and limitations on this site are our implementation; linked organizations do not endorse this tool.